End Ring Glue For Rotary Printing Screen Silicone Ring Gaskets
Rubbing the end-ring and the screen end with a piece of abrasive
paper, then cleaning the rubbed surface with acetone or absolute
2.Preparing the glue:
Mix the components A and B in a ratio of 1: 0.5~1homogeneously on a
wooden or a rubber plate.
Coat the binder evenly on both surfaces between the end-ring and
the nicked screen with a scraper, coupling and removing the
Curing at 80-120 for 20-30 minutes or 24 hours at interior
temperature, or curing at 160-180℃ in a oven with photoemulsion
Bicomponents A and B, A:B=1:0.5~1
Rapid curing, strong adhesive, thermostable and good water
Suitable for adhering end-ring to nickel screen
Component a: 1kg per iron tank
Component b: 1kg per iron tank, and 10kg every case.
One year at 5-35℃(in a sealed and dry place).
This product belongs to not dangerous article.